Description for the Diamond Roller Arbors Mandrels for diamond rolls in excellent quality are designed to suit our truing devices with diamond rolls. Smooth running is very important when truing a grinding wheel using a diamond roll. This is achieved using our mandrels for diamond rolls. A special design and highest precision of the bearings incorporated serve to obtain optimum results. Mandrels for diamond rolls are executed in ultra precision. Radial run-out and side run-out of the mandrel for the diamond roll are specified with a tolerance of 0.002mm in radial and axial direction and thus ensure essential conditions for optimum and economic truing operations using a diamond roll. The OD of the mandrel of the diamond roll should be selected as big as possible in order to ensure the maximum stiffness required. Mandrels for diamond rolls, used for diamond roll truing devices, are either grease-lubricated for life or oil-mist lubricated. The sense of rotation, either clockwise or anticlockwise, may be selected as required. For a quick exchange of the diamond roll, the complete set of diamond roll on its mandrel is provided. Maximum radial run-out and side run-out of the mandrel for the diamond roll amount to a maximum of 2μm. For every diamond roll a diamonr roll mandrel should be provided. Advantages of the common exchange: »   The supplier of the diamond roll may mount the diamond roll on the mandrel, thus optimizing radjal run-out and side run-out. »   Quick changing of diamond roll with mandrel. »   Low wear of mandrel for diamond roll. »   Low wear of diamond roll. »   Better results for truing operation. Diamond Roller Arbors F751220581150D50 RD56x80 RD63x80F5 RD65x180Ö RD65x183F STNO52x42F STR52x50Ö1 STR52x135Ö1 STR56x50F11 STR56x150F STR63x120F Diamond Roller Dressing Spindle Diamond Roller Dressing Unit Radius Truing Devices Accessories
Sitemap Masthead